conference room furniture

Site Map	Ordering	Pricing
Quotes	Dealers Welcome	FAQ

conference room furniture - If they are constrained in any way, they may split upon shrinking when the RH drops to a lower level. furni_ture finishes are also affected as differences between the response of wood and its coating to changes in RH may eventually cause a coating to detach. A prolonged high humidity environment will also promote the possibility of mold growth and insect infestation. To prevent damage, place furni_ture in areas of minimum temperature and RH extremes, thereby avoiding attics, basements, active fireplaces and heating vents. Monitoring temperature and RH in an environment can be done with small, inexpensive thermometers and hygrometers purchased at electronic or hardware stores. When necessary, the RH can be modified to stay within acceptab_le ranges

through the use of humidifiers and dehumidifiers. When environmental conditions are favorable, organic materials including wood, leather and horsehair are vulnerable to infestation by a variety of insects. A common furni_ture pest is the powderpost beetle, less than a quarter inch long, which lays its eggs in small crevices. The insect larvae burrow into the wood creating networks of tunnels or galleries as they eat their way along the grain. As they mature to adults they bore out of the wood leaving an "exit" or "flight" hole and fly off to lay their eggs, completing the cycle. If flight holes are observed in furni_ture, it is important to determine if the infestation is active. Active flight holes are light-colored and contain a fine, sawdust-like material called frass.

conference room furniture conference room furniture